Here goes all of the comments...
in response to Hi, i can't seem to
access the previous comments which had a fix that worked for me, can you provide a new working link to previous comment thread here please? Also - the fix worked for me for some time, but has now reverted to 'not genuine' :( Has there been a new affected update? Or should i stop my computer from updating? Thanks - Michelle, by Michelle. |
at 6:28
AM | ||
in response to HI,, when the windows update
opened in my computer.. there were no update installed.. It says no update installed on this computer..and there is o solution found..plz help.., by Asish Kumar. |
at 6:27
AM | ||
Anonymous
|
on 6/17/13
| ||
works in a very fine good way.... highly
appreciated a lot, for the good work..... Berlin on Comment here |
on
6/17/13 | ||
Anonymous
|
on
6/1/13 | ||
Hi, i can't seem to access the previous
comments which had a fix that worked for me, can you provide a new working link to previous comment thread here please? Also - the fix worked for me for some time, but has now reverted to 'not genuine' :( Has there been a new affected update? Or should i stop my computer from updating? Thanks - Michelle on Comment here1 replies. |
Michelle
|
on
5/19/13 | |
HI,, when the windows update opened in my
computer.. there were no update installed.. It says no update installed on this computer..and there is o solution found..plz help.. on Comment here1 replies. |
on
5/18/13 | ||
on
5/10/13 | |||
open command prompt and enter these
commands: c: cd windows cd system32 cd slmgr cd 0409 slmgr.vbs -rearm on Comment here
in response to Hi Akash, I've
already used RemoveWAT on my PC so now the slmgr file is not in the System32 folder but here in "C:\Windows\System32\slmgr\0409\" I tried running the command but I still get the same message that "slmgr.vbs is not a recognized internal or external command, operable program or batch file." I don't get the pop-up window on logging in because of RemoveWAT but the desktop message still won't go. I want to get rid of that annoying message. Could you provide us with a solution? Thanks in advance., by Arun S. |
on
5/10/13 | ||
worked three times and it worked like a
charm but now it is not working i therefore modified skiprearm command in regedit to 0001 command works but still popup and watertag remained would remove wat is gonna be any good to this problem or do u have any other solution to this onHide “this copy of windows is not genuine” notification in windows 7 |
on
4/30/13 | ||
I don't have an update called
"KB971033" yet I am getting the not genuine message! >< on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/29/13 | ||
had to rebbot twice, but the desktop picture
stayed, and, not more annoying warnings! Thanks! on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/28/13 | |
Hi Akash. I would like to discuss a few
points in this subject. 1. After reading your blog I hv tried to find the KB981033 and guess what I did not find it. Even searching the Installed updates from the search box did not help me out. Without being disappointed I hv started uninstalling the updates one after another from the top. After uninstalling a few I restarted the system and "HURRAY" I found the culprit. Then I fallowed the "Part-A" as recommended. 2. I also hv used another program, as discussed above by our another friend previously, which is "RemoveWAT" which did not fix the issue. But have altered the "slmgr" file name in System32 folder. So what I did??? Before even trying the "Part-A" I ran a "SYSTEM RESTORE" before the event. Though it showed me that it "Did Not Finished Successfully", but when I went ahead to find the "slmgr" file name, it was been fixed already. That means the system restore could not alter everything but altered that corrupted file name in "System32" on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/25/13 | ||
Hi Akash. I would like to discuss a few
points in this subject. 1. After reading your blog I hv tried to find the KB981033 and guess what I did not find it. Even searching the Installed updates from the search box did not help me out. Without being disappointed I hv started uninstalling the updates one after another from the top. After uninstalling a few I restarted the system and "HURRAY" I found the culprit. Then I fallowed the "Part-A" as recommended. 2. I also hv used another program, as discussed above by our another friend previously, which is "RemoveWAT" which did not fix the issue. But have altered the "slmgr" file name in System32 folder. So what I did??? Before even trying the "Part-A" I ran a "SYSTEM RESTORE" before the event. Though it showed me that it "Did Not Finished Successfully", but when I went ahead to find the "slmgr" file name, it was been fixed already. That means the system restore could not alter everything but altered that corrupted file name in "System32" on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/25/13 | ||
Hey its working fine nw... I got my pc back
to normal yeaahhh... thanks man :)) on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/25/13 | ||
Hi Akash.. thanks it worked.and the message
is gone from the desktop screen. but the problem is I get the pop up whn we start the pc to get the genuine windows or ask me later... can you please help with this :) on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/25/13 | ||
hi there this is great all the comments etc
are really helpful,unfortunetly my bleeding pc however is a complete nightmare and ive followed all the comments ive disabled the updates etc etc but i have a problem i hope you can help me with... i cant rearm as it says i dont have permission and when i try to set permissions to admin etc it will not allow me to please help i dont know what else to try :-( :-( on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/24/13 | |
hey, i've found a slmgr script file but i
can't find a .vbs version anywhere, could you help me please ? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/24/13 | |
on
4/24/13 | |||
hey i tried and got till part b step 1 but
when i pass the command slmgr.vbs -rearm it prompts the following msg -can't find script engine "VBScript" for script "C:\windows\system32\slmgr.vbs" what to do??? pls help on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/24/13 | ||
ITs work for me, got no problem with it,
Thank you soooooooo much Akash Bro, May Allah keep you always successful in your life on the right ways.... Love from me <3 ♥ on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/23/13 | |
Hi Akash in the part b i was type slmgr.vbs
-rearm and press enter an error msg ( wscript.exe - Bad Image : c:\windows\system32\vbscript.dll is either not designed to run on windows or it contains an error.Try installing the program again using the original installation media or contact your system administrator or software vendor for support ) occur How to solve this ..... Pls help me...... on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/23/13 | ||
Hey Akash, I changed the registry key to
rearm and I still get the prompt at boot and the "not geuine" message is still at the bottom corner. Am I done, is my Windows corrupted? Please help!!!! on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/22/13 | |
Hi Akash, this worked for me thrice...but
now it says The maximum allowed number of re-arms has been exceeded... i read ur reply abt changing registry key...what's that and how to do that... i use wndows 7 prof. on Hide “this copy of windows is not genuine” notification in windows 7 |
vrishali
|
on
4/22/13 | |
not working for me there is no Windows
Update: KB971033 I've done this once before and it worked but it came back without Windows Update: KB971033 on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/22/13 | ||
Anonymous
|
on
4/22/13 | ||
This really is awesome. worked like a charm.
Thanks! on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/21/13 | ||
Hi Akash in part b i am type slmgr.vbs
-rearm in command prompt and click enter ,i got a error message (c:\windows\system32\vbscript.dll is either not designed to run on windows or it contains an error.try installing the program again using the original installation media or contact your system administrator or the software vendor for support) how to solve this.... please help me... on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/21/13 | ||
It works perfectly but the only problem is
that after 1 month it tells you that Windows is not genuine again, so you don't have to uninstall the update again, you just have to type "slmgr.vbs -rearm" into command prompt and then restart. I did this a month ago and after the 30 days finished I did it again but without part A and it worked. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/21/13 | ||
It works perfectly but the only problem is
that after 1 month it tells you that Windows is not genuine again, so you don't have to uninstall the update again, you just have to type "slmgr.vbs -rearm" into command prompt and then restart. I did this a month ago and after the 30 days finished I did it again but without part A and it worked. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/21/13 | ||
akash notification "Copy of windows not
genuine" I could not find update KB971033. But found SP1 updated. Should i uninstal SP1 and then try the steps you wrote? p.n.patankar@gmail.com on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/20/13 | ||
thanks buddy:)worked like a charm. on Hide “this
copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/19/13 | |
KB971033 is not listed... !? on Hide “this
copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/17/13 | |
WHERE TO APPLY THE ABOVE
CODE"HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/WindowsNT/CurrentVersion/SoftwareProtectionPlatform] “SkipRearm”=1" on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello Akash, I am having a
real problem. I cannot find the KB971033 update in the Installed Update field, but it is in the viewed update history field and I tried the rearm and I got the message "Error:0xC004D307 The maximum allowed number of re-arms has been exceeded." Help! What do I do, by Anonymous. |
on
4/17/13 | ||
no. of times i can use this operation has
been exceeded is there any other way to do it and most of all can u please tell me where did u came to know about it on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/17/13 | ||
Thank you, this is an excellent guide and
worked like a charm! on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/16/13 | |
on
4/16/13 | |||
on
4/16/13 | |||
hello, i have followed these instructions,
however for: "slmgr.vbs -rearm" i get: "not recognized as an internal or external command" kindly advise. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/15/13 | ||
It also worked for me. Thanks a lot Mr.
Sahu. But one thing I noticed on my laptop. When I turn on the laptop for long time say 2/3 hours it pops up again. What is the reason? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/14/13 | |
Thanks aMoon and Akash - i had the same
problem with the slmgr.vbs being found in a weird place so as you recommended at the c:> prompt i typed cd "wierd folder that file is in" and applied the -rearm fix and everything has worked splendid. Note: I also could not find the update as stated as i had tried to fix this problem before unsuccesfully by removing and hiding the pesky update - so i just skipped part A and moved right onto part B = success! on Hide “this copy of windows is not genuine” notification in windows 7
in response to Thank you so much Akash. I
had a minor issue with Part B, but it worked out in the end. When trying to do Part B, I got this message, when I typed [C:\Windows\System32\slmgr.vbs -rearm]. 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. The "slmgr.vbs" file was not in the "C:\Windows\System32" folder... instead it was in a very weird place - "C:\Windows\winsxs\amd64....(a lot of alpha-numeric characters)". I did find a file named "slmgr.vbs.REMOVEWAT" in the System32 folder though. After "-rearm"-ing the "slmgr.vbs" file in the weird folder, I rebooted and my pc loaded without that annoying message. Thank you so much for the help. Really really appreciate it., by aMoon. |
Michelle
|
on
4/12/13 | |
Thanks Akash... i had put up with the pop
ups, black wallpaper and 'get genuine messages' for longer than I could bear. I had tried looking for online fixes before but nothing really worked which looked to be within my abilities - but your fix is so simple and has worked a treat so HUGE THANKS to you, i am so grateful. I may now set a blank white wallpaper just to make up for the dark months with black wallpaper!!! on Hide “this copy of windows is not genuine” notification in windows 7 |
Michelle
|
on
4/12/13 | |
wow it's gone.. thanks friend.. on Hide “this
copy of windows is not genuine” notification in windows 7 |
on
4/11/13 | ||
I found it renamed as "slmgr.vbs.removewat"
You'll have to rename it as "slmgr.vbs" run the command and then rename it back. Must be part of some activation cracks. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Microsoft Windows [Version
6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. *how should i do? , byAnonymous. |
Anonymous
|
on
4/11/13 | |
Thank you, Akash, thank you. This is very
helpful to me. This saved me a lot of installation hours and backing up! Keep it up, my friend! on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/11/13 | ||
Good day Akash, I wish to thank you for this
post, it worked perfectly fine on my first attempt. This post saved me a lot of hours of formatting and re-installation of my software. I really appreciate this post, not only that it helped me, but I can also help others in this situation because of your blog. Thank you and have a nice day. Keep blogging, friend! Jay on Hide “this copy of windows is not genuine” notification in windows 7 |
on
4/10/13 | ||
on
4/9/13 | |||
How to change the registry key.Even I am
getting the same Error:0xC004D307 The maximum allowed number of re-arms has been exceeded.Please let me know step by step. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello Akash, I am having a
real problem. I cannot find the KB971033 update in the Installed Update field, but it is in the viewed update history field and I tried the rearm and I got the message "Error:0xC004D307 The maximum allowed number of re-arms has been exceeded." Help! What do I do, by Anonymous. |
on
4/8/13 | ||
I am also getting the same error message.How
to change the registy key Parthasarathy on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello Akash, I am having a
real problem. I cannot find the KB971033 update in the Installed Update field, but it is in the viewed update history field and I tried the rearm and I got the message "Error:0xC004D307 The maximum allowed number of re-arms has been exceeded." Help! What do I do, by Anonymous. |
on
4/8/13 | ||
just disconnect ur internet connection while
typing in the cmnd prompt...it 'll be done on Hide “this copy of windows is not genuine” notification in windows 7
in response to its prompt again whenever i
open my pc it ask for getting the genuine but it doesnt appear the message in my desktop so now i can change my backgorund. is it ok if it only appear in start of the pc?, by Mary Rose Cruz. |
on
4/7/13 | ||
thankas a lot. This worked perfectly for me,
thanks again. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/6/13 | |
Тhаnks for ѕharing your
thoughts on lose weight drinking. Regards My webÑ•Ñ–te :: raspberryketoned.co.uk on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/5/13 | |
Hi Akash, I've already used RemoveWAT on my
PC so now the slmgr file is not in the System32 folder but here in "C:\Windows\System32\slmgr\0409\" I tried running the command but I still get the same message that "slmgr.vbs is not a recognized internal or external command, operable program or batch file." I don't get the pop-up window on logging in because of RemoveWAT but the desktop message still won't go. I want to get rid of that annoying message. Could you provide us with a solution? Thanks in advance. on Comment here1 replies. |
Arun S
|
on
4/5/13 | |
on
4/4/13 | |||
Dear Akash, I had followed complete process.
After re-arms I received message that "command completed successfully and restart the system". But after restarting the window is not genuine message is not removed. I hope you will reply as soon as possible on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
4/4/13 | |
on
4/1/13 | |||
hi,i have done this a couple of months ago
and it worked great,but now the notifications show again,do i just have to re-arm it again? on Hide “this copy of windows is not genuine” notification in windows 7 |
Chen
|
on
4/1/13 | |
Hi Akash, I hope you can help me. I used the
method below to remove 30 days activation message but i am still getting message on window. "this copy of windows is not genuine". Help pls Thanks http://www.apsense.com/article/how-to-activate-windows-7-operating-system-legally.html on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/31/13 | |
Hi Akash,I a, havinh problem. I hope you can
help me.I used the method below to remove 30 days for activation message. I am still getting message on the desktop "this copy of windows is not genuine". Help pls. http://www.apsense.com/article/how-to-activate-windows-7-operating-system-legally.html Thamks on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello Akash, I am having a
real problem. I cannot find the KB971033 update in the Installed Update field, but it is in the viewed update history field and I tried the rearm and I got the message "Error:0xC004D307 The maximum allowed number of re-arms has been exceeded." Help! What do I do, by Anonymous. |
Anonymous
|
on
3/31/13 | |
thank a ton, its great relief getting rid of
the notification. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/27/13 | ||
Thanks a ton, its great relief getting rid
of the notification. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/27/13 | ||
Hi Akash, Can't manage with that slmgr.vbs.
Looked for it in system32 and all I foundo folder slmgr containing another folder named 0409, containing a file called slmgr which can't be renamed. What's to be done? on Hide “this copy of windows is not genuine” notification in windows 7 |
dorelus
|
on
3/26/13 | |
Thanks. It work on windows 7 SP1. on Hide “this
copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/26/13 | |
on
3/24/13 | |||
Worked like a charm. I bought my Laptop with
windows 7 then I bought Windows 8. I hated it so I decided to download windows 7 gain. Hope microsoft doesn't hate me. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/24/13 | ||
on
3/24/13 | |||
hi akash, having the same problem. went into
the System32 folder and did a search for the slmgr.vbs file. results came back with, 1. a slmgr folder 2. a file titled slmgr.vbs.removewat what todo? Donovan on Hide “this copy of windows is not genuine” notification in windows 7
in response to Microsoft Windows [Version
6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. *how should i do? , byAnonymous. |
Anonymous
|
on
3/23/13 | |
thanks bro.... worked lik a charm on Hide “this
copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/22/13 | |
cant work. it shows 'slmgr.vbs -rearm' is
not recognised as an internal or external command,operable program or batch file on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/21/13 | |
I can't find an update titled
"KB971033", most of them start with "KB2" Any help? on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/21/13 | ||
it worked, thank you sooooooo much. on Hide “this
copy of windows is not genuine” notification in windows 7
in response to Dint workl bro... Slmgr.vbs
rearm produced some big msgs..dint know that much computer..so couldnt interpret that msg..but the point is it stil says windows not genuine... Kya kare???, by rdx. |
Anonymous
|
on
3/21/13 | |
on
3/20/13 | |||
Anonymous
|
on
3/19/13 | ||
Got the same problem with others with the
".removewat" addition, simply deleted that to change the extension back and it worked like a charm. Thanks, Akash. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/18/13 | |
Hi Akash, I've successfully done your A
& B instruction and it works fine after rebooting. But i am confuse with this message after checking my computer properties. "3 days until automatic activation. Activate Windows now" For now, i've just disabled my windows update and waiting for that "3days" if the problem will comes up again :) BTW thanks for sharing this nice info! :) on Hide “this copy of windows is not genuine” notification in windows 7 |
z
|
on
3/16/13 | |
Thanks bhai, May God Bless you. on Hide “this
copy of windows is not genuine” notification in windows 7 |
on
3/16/13 | ||
Hi.. I followed instructions several times,
did not get any error messages, but on reboot, I am still prompted to activate, and the "not genuine" message still appears in the lower right hand corner. This is also a legetimate copy of windows. estarx@yahoo.com on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/16/13 | |
My situation is same with you, Marry Rose
Cruz. I also wonder does it OK if it appear when I starting my laptop. Have a way to solve it? Thanks. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/16/13 | ||
getting this problem with using slmgr.vbs:
C:\Users\Bashar>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/13/13 | ||
hay dude, i didn't find KB970133 update! I
found only KB2565063 and KB958488. What should I do, plz? on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/10/13 | ||
OMG IT FREAKIN' WORKED. THANK YOU VERY MUCH
I'VE BEEN SUFFERING FOR THIS PROBLEM FOR A VERY LONG TIME. THANK YOU VERY MUCH. :) on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/10/13 | |
Hi Akash, I had a problem following a
complete system failure due to HDD crash. I replaced with SSD and the got the Windows not genuine rubbish. I followed your instructions and they worked perfectly. However now I am getting a popup occasionally advising me I must activate windows, the last one said in 25 days? An earlier poster had a similar problem and you were going to look into it, do you have any news please? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/10/13 | |
and by the way, I couldn't find 'KB971033'
anymore in installed updates. I would appreciate some help :) on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/10/13 | ||
It did work for me for a couple of weeks,
but then the notification appears again this evening even though I have set the update setting to 'Never Check for Updates'. Any idea how to resolve this please? Thanks. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/10/13 | ||
Thanks for the post. I cannot find the
KB971033 file in my window updates. Any hints? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/9/13 | |
wow man i must say i douted it but yes it's
working so far now i have 1 consern is this would this have any foucher conflicks geting help geting updated with any new updates thay come out with u think?. and thankls man on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/9/13 | ||
heartly thanks so so so so thanks......
lotoff thanks i do it succesfully. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/8/13 | ||
i did all there was and when i entered
slmgr.vbs -rearm and then enter key it said "is not recognised as internal or external command,operable program or batch file" please help on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/8/13 | |
It really works bro... thanks & keep it
up.... on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/7/13 | |
Just a suggestion After doing the above
mentioned steps if you are still getting the "windows genuine" message at the start up then just shut down your computer, switch off the power and then switch it back on instead of "restarting" it.. you shouldnt be getting the "genuine" message now on Hide “this copy of windows is not genuine” notification in windows 7 |
Kunal
|
on
3/7/13 | |
It totally works guys... Follow all the
steps in the exact same way Appreciate the help.... on Hide “this copy of windows is not genuine” notification in windows 7 |
Kunal
|
on
3/7/13 | |
Your problem seems new. Let me work on it.
on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi there, I have followed all
the instructions and read all the comments, but nobody else seems to get the error message I am getting. In part B; Enter slmgr.vbs -rearm i keep getting an error message saying; "On a computer using windows non core edition, run 'slui.exe 0x2a 0x80070426' to display the error text." I have a legit copy of windows, or so i assume, as i bought my computer from future shop 4 years ago and havent had an issue until now... i don't understand what the re-arming does? will it ruin my computer if i reboot it without rearming? , by Anonymous. |
on
3/6/13 | ||
in response to Hello Akash, I am having a
real problem. I cannot find the KB971033 update in the Installed Update field, but it is in the viewed update history field and I tried the rearm and I got the message "Error:0xC004D307 The maximum allowed number of re-arms has been exceeded." Help! What do I do, by Anonymous. |
on
3/6/13 | ||
Change the registy key:
HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/WindowsNT/CurrentVersion/SoftwareProtectionPlatform] “SkipRearm”=1 And you can re-arms again. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello Akash, I am having a
real problem. I cannot find the KB971033 update in the Installed Update field, but it is in the viewed update history field and I tried the rearm and I got the message "Error:0xC004D307 The maximum allowed number of re-arms has been exceeded." Help! What do I do, by Anonymous. |
on
3/6/13 | ||
in response to WHEN I DO THE PART B 3 STEP
GETTING A MSG OF ERROR 0XCOO4FO25 access denied the requested action requires elevated privilage what can i do pls help me, by bk. |
on
3/6/13 | ||
its prompt again whenever i open my pc it
ask for getting the genuine but it doesnt appear the message in my desktop so now i can change my backgorund. is it ok if it only appear in start of the pc? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
3/4/13 | ||
on
3/4/13 | |||
on
3/4/13 | |||
on
3/3/13 | |||
thanx so much,,,thought I was gonna have to
spend more money on getting rid of viruses.at first I thoght it was not gonna work after I tried it about four times.realized at the end after doing evrything else i forgot to hit "enter",,,,when I did,it worked like a charm,,,thanks again. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/2/13 | |
Hello Akash, I am having a real problem. I
cannot find the KB971033 update in the Installed Update field, but it is in the viewed update history field and I tried the rearm and I got the message "Error:0xC004D307 The maximum allowed number of re-arms has been exceeded." Help! What do I do on Hide “this copy of windows is not genuine” notification in windows 76 replies. |
Anonymous
|
on
3/2/13 | |
nice, it worked perfetly for me !great job
you saved me a lot ^__^ on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
3/2/13 | |
This worked perfectly for me!!! Kudos!!!!
Well done!! on Hide “this copy of windows is not genuine” notification in windows 7 |
on
3/1/13 | ||
I also wanted to clear up that my slmgr is
in the system 32 folder and is not named anything else. and that i ran command as administrator and the the command prompt is honed in on C:Windows\system32\> slmgr.vbs -rearm again i know you've heard it a million times, but thanks for your help and continuing to answer all of our questions. Chris on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi there, I have followed all
the instructions and read all the comments, but nobody else seems to get the error message I am getting. In part B; Enter slmgr.vbs -rearm i keep getting an error message saying; "On a computer using windows non core edition, run 'slui.exe 0x2a 0x80070426' to display the error text." I have a legit copy of windows, or so i assume, as i bought my computer from future shop 4 years ago and havent had an issue until now... i don't understand what the re-arming does? will it ruin my computer if i reboot it without rearming? , by Anonymous. |
Anonymous
|
on
3/1/13 | |
Hi there, I have followed all the
instructions and read all the comments, but nobody else seems to get the error message I am getting. In part B; Enter slmgr.vbs -rearm i keep getting an error message saying; "On a computer using windows non core edition, run 'slui.exe 0x2a 0x80070426' to display the error text." I have a legit copy of windows, or so i assume, as i bought my computer from future shop 4 years ago and havent had an issue until now... i don't understand what the re-arming does? will it ruin my computer if i reboot it without rearming? on Hide “this copy of windows is not genuine” notification in windows 72 replies. |
Anonymous
|
on
3/1/13 | |
rename slmgr.vbs.removewat to slmgr.vbs it
will work on Hide “this copy of windows is not genuine” notification in windows 7
in response to hi, i already tried another
diferent way's to resolve this thing, and one of them was the thing to removewat, and i did, i removedwat but the message stills apears in my bottom right corner and when i was trying your way this msg appears slmgr.vbs' is not recognized as an internal or external command, and on my sistem32 folder i only got a slmgr folder, and a think called slmgr.vbs.removewat. any tips ? ty, by Guilherme Aleixo. |
on
2/28/13 | ||
mail me at 258zack@gmail.com on Hide “this copy of windows is not genuine” notification in
windows 7
in response to thanks, i rearmed,
uninstalled kb971033, hide update but its still there....no change, i also get eror message on boot up: 0xc004f200 just as before...? any help...., by Anonymous. |
on
2/28/13 | ||
thank you,and keep up the good work on Hide “this copy of windows is not genuine” notification in
windows 7 |
Anonymous
|
on
2/28/13 | |
I had a same problem. I changed couple of
registry settings (I don't remember what:)), and all error messages is disappeared but the "genuine message" is still there in the right-bottom corner of the window. I don't care this message, I put a light background picture on the desktop and this message is not visible :) When I check the "My computer" status it says:"You must activate today. Activate the windows now." but there is no any effect since two days. If you would like see my certain registry settings I can send you in picture but please give me an email address. bye Nazareus on Hide “this copy of windows is not genuine” notification in windows 7
in response to thanks, i rearmed,
uninstalled kb971033, hide update but its still there....no change, i also get eror message on boot up: 0xc004f200 just as before...? any help...., by Anonymous. |
Anonymous
|
on
2/28/13 | |
works pure dead brilliant Cheers m8 on Hide “this copy of windows is not genuine” notification in
windows 7 |
Anonymous
|
on
2/27/13 | |
sweet, it worked on my win7 ultimate. reboot
works now and no more annoying popups and desktop tag at the bottom right. I just followed the procedure as below but I've also tried to run the "Windows Loader 1.9.7" first without success. Maybe the combination of everything helped. Thanks! on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/27/13 | |
hi, i already tried another diferent way's
to resolve this thing, and one of them was the thing to removewat, and i did, i removedwat but the message stills apears in my bottom right corner and when i was trying your way this msg appears slmgr.vbs' is not recognized as an internal or external command, and on my sistem32 folder i only got a slmgr folder, and a think called slmgr.vbs.removewat. any tips ? ty on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
2/27/13 | ||
thanks, i rearmed, uninstalled kb971033,
hide update but its still there....no change, i also get eror message on boot up: 0xc004f200 just as before...? any help.... on Hide “this copy of windows is not genuine” notification in windows 72 replies. |
Anonymous
|
on
2/27/13 | |
Change the registy key:
HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/SoftwareProtectionPlatform] “SkipRearm”=1 And you can re-arms again. Anyway, I have a problem: I did A and B but it doesn't help. The autimatic update is turned off. So I could uninstall the KB971033 and I could rearm but the genuine message is still on my screen (windows 7 enterprise). Any advice? thanks, Nazaerus on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/26/13 | |
any advice? error:0xc004d307 the maximum
number of re-arms has been exceeded, you must re-install the OS before trying to re-arm again? any help?? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/26/13 | |
I get a message saying
"error:0xc004d307 the maximum number of re-arms has been exceeded, you must re-install the OS before trying to re-arm again? any help?? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/26/13 | |
I don't know there are restrictions on
transaction with Indian paypal users. Hey! that's kind of racist. I appreciate you tried. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Akash, this worked perfectly
and was surprising easy with your instructions. I tried previously with different instructions posted by two other people on youtube without success. The notifications were so annoying and now they're gone forever. You are brilliant! Thanks for posting this. So...how come the PayPal donate button will not allow people to send money to users in India?, by Anonymous. |
on
2/24/13 | ||
in response to Hello friend. Like a lot of
people, I could not find Update KB***1033 in the list of installed updates. Then I remembered that I had hidden it previously and switched off automatic updates (Thinking that would stop WGA from sneaking in). Despite that, the message appeared. So I went to Control Panel\Windows Updates, clicked on Restore Hidden Updates and this re-installed KB***1033, rebooted, then opened cmd prompt as admin, cd C:\Windows\System32 and entered your command " slmgr.vbc -rearm " I got a confirmation message from system to say command received successfully and rebooted. Gone is the text and black window and no nag message at start-up. Does that mean that from now on, as long as windows updates are switched off, we will not see the nag screen again? Thanks a lot for the tip!!! , byAnonymous. |
on
2/24/13 | ||
@Akash Kumar -Thanks a lot big brO. it realy
works fine and dat tooks only 5 minutes :)) on Hide “this copy of windows is not genuine” notification in windows 7 |
on
2/24/13 | ||
Hmm think i fixed it now by just
reinstalling KB971033 first and then doing what you said :) thx again on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi, I fixed it about a month
ago, thanks! But a couple of days ago the "this copy of windows is not genuine" error came back (even though I actually have a genuine copy....) and windows update is turned off and KB971033 is not installed. Any ideas?, byAnonymous. |
Anonymous
|
on
2/24/13 | |
Anonymous
|
on
2/23/13 | ||
hey.....on right click @ update for MS
windows i didnt getting option of uninstall rather in other all i could get but not in these!! on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/23/13 | |
Akash, this worked perfectly and was
surprising easy with your instructions. I tried previously with different instructions posted by two other people on youtube without success. The notifications were so annoying and now they're gone forever. You are brilliant! Thanks for posting this. So...how come the PayPal donate button will not allow people to send money to users in India? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/23/13 | |
Correction: After re-installing KB***1033 I
then removed it again before rebooting and opening command prompt. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello friend. Like a lot of
people, I could not find Update KB***1033 in the list of installed updates. Then I remembered that I had hidden it previously and switched off automatic updates (Thinking that would stop WGA from sneaking in). Despite that, the message appeared. So I went to Control Panel\Windows Updates, clicked on Restore Hidden Updates and this re-installed KB***1033, rebooted, then opened cmd prompt as admin, cd C:\Windows\System32 and entered your command " slmgr.vbc -rearm " I got a confirmation message from system to say command received successfully and rebooted. Gone is the text and black window and no nag message at start-up. Does that mean that from now on, as long as windows updates are switched off, we will not see the nag screen again? Thanks a lot for the tip!!! , byAnonymous. |
Anonymous
|
on
2/22/13 | |
Hello friend. Like a lot of people, I could
not find Update KB***1033 in the list of installed updates. Then I remembered that I had hidden it previously and switched off automatic updates (Thinking that would stop WGA from sneaking in). Despite that, the message appeared. So I went to Control Panel\Windows Updates, clicked on Restore Hidden Updates and this re-installed KB***1033, rebooted, then opened cmd prompt as admin, cd C:\Windows\System32 and entered your command " slmgr.vbc -rearm " I got a confirmation message from system to say command received successfully and rebooted. Gone is the text and black window and no nag message at start-up. Does that mean that from now on, as long as windows updates are switched off, we will not see the nag screen again? Thanks a lot for the tip!!! on Hide “this copy of windows is not genuine” notification in windows 72 replies. |
Anonymous
|
on
2/22/13 | |
Yes I'm sure I'm administrator and it's not
installed on my account. One thing that I think might be causing it: I'm currently the only useraccount but I had made a guest acount for a friend a couple weeks ago (not sure if that was an admin account) and deleted it when he left. Any chance the update somehow installed on his account? (I cant find any traces of the account anymore) on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi, I fixed it about a month
ago, thanks! But a couple of days ago the "this copy of windows is not genuine" error came back (even though I actually have a genuine copy....) and windows update is turned off and KB971033 is not installed. Any ideas?, byAnonymous. |
Anonymous
|
on
2/22/13 | |
on
2/21/13 | |||
Looks like you are in a big trouble. I'll
reply you as soon as I find the correct solution. on Hide “this copy of windows is not genuine” notification in windows 7
in response to i've been using this
rearming for past one month and proceeding with my updates. now i've done the same and it's saying that ur system has used maximum number of rearms and should install os again to continue.. can't i do anything with this? , by charan. |
on
2/21/13 | ||
Are you sure KB971033 is not installed??
Make it sure by logging in windows as an administrator. It is possibly that KB971033 is installed in your system's administrator account and not in any other account. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi, I fixed it about a month
ago, thanks! But a couple of days ago the "this copy of windows is not genuine" error came back (even though I actually have a genuine copy....) and windows update is turned off and KB971033 is not installed. Any ideas?, byAnonymous. |
on
2/21/13 | ||
thanks a lot.... it worked fine for me and
took only 2 mins :-) on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/21/13 | |
Just a note of what happened with me if it
helps anyone. I completed parts A and B but after the final re-boot i still got a message while logging in that windows mmight not be genuine but on the desktop the message was gone altho the screen was still black. I put my wallpaper back on and then did another reboot and hey presto no more annoying messages and no more black desktop :) on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/19/13 | |
Anonymous
|
on
2/19/13 | ||
This comment has been removed by a blog
administrator. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/18/13 | |
i've been using this rearming for past one
month and proceeding with my updates. now i've done the same and it's saying that ur system has used maximum number of rearms and should install os again to continue.. can't i do anything with this? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
2/17/13 | ||
Anonymous
|
on
2/16/13 | ||
Hey. Removing the .vbr extension from the
slmgr.vbr command worked for me (just typed slmgr -rearm and hit enter). Weird. Oh, and I had to also rename it from "slmgr.vbr.removewat" to "slmgr.vbr". Anyway, thanks a bunch. Looks like it's working nicely now. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/16/13 | |
Hi, I fixed it about a month ago, thanks!
But a couple of days ago the "this copy of windows is not genuine" error came back (even though I actually have a genuine copy....) and windows update is turned off and KB971033 is not installed. Any ideas? on Hide “this copy of windows is not genuine” notification in windows 73 replies. |
Anonymous
|
on
2/16/13 | |
Thanks. Worked like a charm! :) on Hide “this copy of windows is not genuine” notification in
windows 7 |
on
2/16/13 | ||
A big Thanks... Works great... on Hide “this copy of windows is not genuine” notification in
windows 7 |
on
2/15/13 | ||
Your system configuration is fine.
Installing mac on your PC will require some changes in your windows OS. But, rather installing the whole mac operating system why don't you use virtual machine software like VMware. It'll be much easier to install/uninstall or operate any number of OS on your system. You don't even have to change anything else on your PC. on Post your computer related problems here, lets see if I can help?
in response to dear bro.. i was willing to
install MAC os on my windows PC ..please guide me through the same.. my system configurations: RAM 1gb Processor: Cure 2 Duo (Intel) E7200 @ 2.53GHz HDD: 250+gb Graphic card: No can i install mac on my pc.. if yes .. how.. ?? , byRaghav Duneja. |
on
2/15/13 | ||
This problem has already been discussed.
Please read comments. on Hide “this copy of windows is not genuine” notification in windows 7
in response to hi friend i do the first step
and for executing second step getting messages like this and i located the file system 32 folder. saying unrecognized option -ream. please suggest, by Anonymous. |
on
2/15/13 | ||
You need to log in your computer with
administrator account. on Hide “this copy of windows is not genuine” notification in windows 7
in response to I could not find the KB971033
update. Do some other updates too cause this problem?, by Anonymous. |
on
2/15/13 | ||
you need to disable windows update. on Hide “this copy of windows is not genuine” notification in
windows 7
in response to Hi Akash - On Jan 9th I
followed your instructions for removing the windows not genuine message. It worked fine until today. We tried to follow your instructions again, but was not able to find the Windows Update: KB971033 file. It is still gone. The only things that have changed were Adobe flash player 11 plugin, adobe reader 11, Mozilla Firefox 18.0.1, Mozilla maintenance service and McAfee Security Scan Plus were updated. Could any of these updates done something to cause the not genuine message to reappear? Any ideas? :-( S , byAnonymous. |
on
2/15/13 | ||
You need to log in your computer with
administrator account. on Hide “this copy of windows is not genuine” notification in windows 7
in response to DEAR AKASH I M WASEEM I TRIED
BUT IN WINDOWS UPDATE OPTION, IT SHOWS THERE IS NO UPDATES INSTAL ON UR COMPUTER... SO WHAT I HAVE TO DO.....???????, by Anonymous. |
on
2/15/13 | ||
Disable windows update. Even after disabling
windows update all the critical updates will still be installed. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Add another admirer. But now,
how about future? Every month or so do a manual update and re-disable KB971033 and a slmgr.vbs -rearm? Have something more permanent / easier to use, in mind for the future? Microsoft going to decline updating, if KB971033 missing or other indication of circumvention?, by Anonymous. |
on
2/15/13 | ||
Read comments. This problem has been
discussed eariler. on Hide “this copy of windows is not genuine” notification in windows 7
in response to I've tried it, and I
get this message Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. even after doing this step >cd "c:\windows\system32\" >slmgr.vbs -rearm so, what should I do? :(, byAnonymous. |
on
2/15/13 | ||
Thanks for posting the problem you were
facing. I'm sure it'll help others who are facing the same problem. on Hide “this copy of windows is not genuine” notification in windows 7
in response to This worked! Thanks! Took me
a few tries because you cannot only just right-click and select run as administrator. I was doing this but from a standard account. Once I logged out of standard accounts completely and only logged in from the one administrator account, I find that it still had KB971033 even though it was deleted from my standard account I use. Then even though logged into only administrator account, still right-click and say run as administrator. It will ask do you want this program to make changes, say yes. then when typing the prompt is says it went through and restart. Yay!, by Anonymous. |
on
2/15/13 | ||
See at the end of my post. Its written there
what you need to do. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi. I did what you said and
the words on bottom right of my desktop disappearaed. However when i restart my com, there is still a pop up that says my copy of windows is not genuine. Any ideas?, by Raye Ng. |
on
2/15/13 | ||
please post the error you got on Hide “this copy of windows is not genuine” notification in
windows 7
in response to I found it but every time I
try to uninstall it I get an error and then cancels the uninstall is there another way to remove it, by Tom Bowman. |
on
2/15/13 | ||
There is a permanent solution. All you need
to do is disable windows update. on Hide “this copy of windows is not genuine” notification in windows 7
in response to slmgr.vbs -dli(license
display) showed me only 30days trial left. may be after 30 days the same might happen. then what to do . enter the same command again. is this permanent or temporary solution, by Anonymous. |
on
2/15/13 | ||
in response to AnonymousDecember 28, 2012:
thanks for your sharing to rename the slmgr.vbs file. did this and the rest of Akash's instructions worked after that! thanks Akash!, by Helene. |
on
2/15/13 | ||
Just do the PART B and ping me what you got.
on Hide “this copy of windows is not genuine” notification in windows 7
in response to Boss...there is no update
found over there but then to its showing that message what to do now , by Vasim Mansuri. |
on
2/15/13 | ||
I've clearly mentioned in my article that
you need to disable windows update. -"Be sure to turn off windows update or else you will face the same problem again. Alternatively, you can hide Windows Update: KB971033 in your windows update history." It wont harm your system. I give you my words. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Akash tusi gr8 ho... it works
fine but it reappeared after few days ... shud I continue removing the update or is there some other method to ensure it does not repeat..... , by Anonymous. |
on
2/15/13 | ||
The updates that are important(critical
updates) for your system will be installed even after disabling windows update. on Hide “this copy of windows is not genuine” notification in windows 7
in response to How do you 'hide'
the update, and does this prevent windows from re-downloading and installing it? I have changed my settings so I now control what updates it asks me to install, and can I stop it from asking me to download that particular update kb971033 without deactivating windows updates and therfore all other updates that actually help my pc?, by Anonymous. |
on
2/15/13 | ||
you need to disable windows update on Hide “this copy of windows is not genuine” notification in
windows 7
in response to First time I tried it worked
well, but now, it appears again and I use the same way to disappear it, I've removed "KB971033" but when I reboot my lap, the message keep appears.=( How do I remove the message then?? Help please, thanks., byNH Lie. |
on
2/15/13 | ||
Its better you disable windows update. on Hide “this copy of windows is not genuine” notification in
windows 7
in response to This is very good.now I open
windows update or not? Pl z answer it., by KUNAL PATENCHA. |
on
2/15/13 | ||
in response to dear bro.. i was willing to
install MAC os on my windows PC ..please guide me through the same.. my system configurations: RAM 1gb Processor: Cure 2 Duo (Intel) E7200 @ 2.53GHz HDD: 250+gb Graphic card: No can i install mac on my pc.. if yes .. how.. ?? , byRaghav Duneja. |
on 2/15/13
| ||
dear bro.. i was willing to install MAC os
on my windows PC ..please guide me through the same.. my system configurations: RAM 1gb Processor: Cure 2 Duo (Intel) E7200 @ 2.53GHz HDD: 250+gb Graphic card: No can i install mac on my pc.. if yes .. how.. ?? on Post your computer related problems here, lets see if I can help?2 replies. |
on
2/15/13 | ||
Hello Akash, slmgr.vb is not found in system
32 folder. I already perform procedure A but procedure B is unsuccessful. Please help. Thanks! onHide “this copy of windows is not genuine” notification in windows 7
in response to Microsoft Windows [Version
6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. *how should i do? , byAnonymous. |
Anonymous
|
on
2/15/13 | |
hi just a thing that worked for me... first,
this happened: >slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. then, I searched for it in system 32, and found it with the following name: slmgr.vbs.removewat (or something like that) aniway, i just renamed it to slmgr.vbs after that the command worked for me on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/15/13 | |
Thank you and removed the hassele on Hide “this copy of windows is not genuine” notification in
windows 7 |
on
2/14/13 | ||
Hey Akash...Worked like a champ...Thanks
Buddy. Do you have any sisters that are geeks and need a husband?...lol on Hide “this copy of windows is not genuine” notification in windows 7 |
on
2/14/13 | ||
Anonymous
|
on
2/14/13 | ||
hi friend i do the first step and for
executing second step getting messages like this and i located the file system 32 folder. saying unrecognized option -ream. please suggest on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/14/13 | |
Akash Kumar Sahu......Thanks Alot ...!! You
are awesome..!! Was so frustrated because of that shitty crap....! Thanks for the help..!!! on Hide “this copy of windows is not genuine” notification in windows 7 |
on
2/14/13 | ||
I could not find the KB971033 update. Do
some other updates too cause this problem? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/12/13 | |
Thank you Akash, Your method worked well.
Your instructions were easy to follow and concise. By the looks of your blog you have the patients of Job. :>) on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/12/13 | |
This is very good.now I open windows update
or not? Pl z answer it. on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
2/12/13 | ||
Hello worked for me. I had a problem with
....... slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file I left out .vbs and it worked on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/11/13 | |
Thank You so verrrrrrrry much:-)I followed
the steps and it worked. Was very much appreciated. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/10/13 | |
Hi Akash - On Jan 9th I followed your
instructions for removing the windows not genuine message. It worked fine until today. We tried to follow your instructions again, but was not able to find the Windows Update: KB971033 file. It is still gone. The only things that have changed were Adobe flash player 11 plugin, adobe reader 11, Mozilla Firefox 18.0.1, Mozilla maintenance service and McAfee Security Scan Plus were updated. Could any of these updates done something to cause the not genuine message to reappear? Any ideas? :-( S on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/9/13 | |
thanks man its really working on Hide “this copy of windows is not genuine” notification in
windows 7 |
on
2/9/13 | ||
Thanks mate, I also had that slmgr.vbs
removewat problem. I renamed it and then rearmed it and now I don't have that message. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/9/13 | |
Jigar Acharya - Zambia Thanks It's Working
now, i can set my thems now also wallpaper i can put it's amazing work on Hide “this copy of windows is not genuine” notification in windows 7 |
on
2/8/13 | ||
DEAR AKASH I M WASEEM I TRIED BUT IN WINDOWS
UPDATE OPTION, IT SHOWS THERE IS NO UPDATES INSTAL ON UR COMPUTER... SO WHAT I HAVE TO DO.....??????? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/7/13 | |
well man thanks a lot.I cant describe how I
feel right now,you know I live in Bosnia and Herzegovina and we are very poor country so I have no job and I am not able to pay money for a original windows copy so thanks a lot! I will say it on our language: "Hvala ti brate mnogo ti hvala". onHide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/7/13 | |
Thanx a lot Bhai... Its Work =D on Hide “this copy of windows is not genuine” notification in
windows 7 |
Anonymous
|
on
2/6/13 | |
Arif siddiquii wow.....great
solution....100% work tx.............tx so much on Hide “this copy of windows is not genuine” notification in windows 7 |
on
2/6/13 | ||
the others did not by the way . yours is
just the one that worked. thank again :) on Hide “this copy of windows is not genuine” notification in windows 7
in response to thank you so much . it realy
worked. of all the stuffs i tried , install this do that and this. This is the easiest i found and it worked! :D bless you sir :) , by catherine. |
on
2/5/13 | ||
Hi. Thanks for a great solution. It worked.
For everyone who can't proceed to step B, look for slmgr.vbs in your system 32 folder. Mine was slmgr.vbs.removewat. I had tried a different solution which renamed slmgr.vbs. I just restored it to its original name and proceeded to step B. onHide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/3/13 | |
did everything perfectly and did not work at
all update is no longer under installed update but is in the view history update and there is no option to uninstall on Hide “this copy of windows is not genuine” notification in windows 7
in response to Thank you so much Akash. I
had a minor issue with Part B, but it worked out in the end. When trying to do Part B, I got this message, when I typed [C:\Windows\System32\slmgr.vbs -rearm]. 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. The "slmgr.vbs" file was not in the "C:\Windows\System32" folder... instead it was in a very weird place - "C:\Windows\winsxs\amd64....(a lot of alpha-numeric characters)". I did find a file named "slmgr.vbs.REMOVEWAT" in the System32 folder though. After "-rearm"-ing the "slmgr.vbs" file in the weird folder, I rebooted and my pc loaded without that annoying message. Thank you so much for the help. Really really appreciate it., by aMoon. |
Anonymous
|
on
2/2/13 | |
Add another admirer. But now, how about
future? Every month or so do a manual update and re-disable KB971033 and a slmgr.vbs -rearm? Have something more permanent / easier to use, in mind for the future? Microsoft going to decline updating, if KB971033 missing or other indication of circumvention? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/2/13 | |
in installed update section i have only one
update "adobe reader x" and nothing else ..........what to do? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
2/1/13 | |
thanks a million worked like a charm on Hide “this copy of windows is not genuine” notification in
windows 7 |
Anonymous
|
on
2/1/13 | |
I've tried it, and I get this message
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. even after doing this step >cd "c:\windows\system32\" >slmgr.vbs -rearm so, what should I do? :( on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
2/1/13 | |
Thank u very much aakash!!! My problem is
solved....... on Hide “this copy of windows is not genuine” notification in windows 7 |
on
2/1/13 | ||
This worked! Thanks! Took me a few tries
because you cannot only just right-click and select run as administrator. I was doing this but from a standard account. Once I logged out of standard accounts completely and only logged in from the one administrator account, I find that it still had KB971033 even though it was deleted from my standard account I use. Then even though logged into only administrator account, still right-click and say run as administrator. It will ask do you want this program to make changes, say yes. then when typing the prompt is says it went through and restart. Yay! on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
1/31/13 | |
I tried the second time step B, and it
worked. The first time it didn't work either. on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/31/13 | |
Hi. I did what you said and the words on
bottom right of my desktop disappearaed. However when i restart my com, there is still a pop up that says my copy of windows is not genuine. Any ideas? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
1/31/13 | ||
thank-you sir-much appreciated-cheers on Hide “this copy of windows is not genuine” notification in
windows 7 |
Anonymous
|
on
1/29/13 | |
Thank you Akash. It is so simple and it
worked for me. great. Anil on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/29/13 | |
the it I'm referring to is the update I want
to remove the not genuine message too though on Hide “this copy of windows is not genuine” notification in windows 7
in response to I found it but every time I
try to uninstall it I get an error and then cancels the uninstall is there another way to remove it, by Tom Bowman. |
on
1/28/13 | ||
I found it but every time I try to uninstall
it I get an error and then cancels the uninstall is there another way to remove it on Hide “this copy of windows is not genuine” notification in windows 72 replies. |
on
1/28/13 | ||
amazinG! thank you amazing dude on Hide “this copy of windows is not genuine” notification in windows
7 |
Anonymous
|
on
1/27/13 | |
Thanks Mr. Sahu it really works i love to
use this thanks a ton on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/26/13 | |
Anonymous
|
on
1/25/13 | ||
slmgr.vbs -dli(license display) showed me
only 30days trial left. may be after 30 days the same might happen. then what to do . enter the same command again. is this permanent or temporary solution on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
1/23/13 | |
AnonymousDecember 28, 2012: thanks for your
sharing to rename the slmgr.vbs file. did this and the rest of Akash's instructions worked after that! thanks Akash! on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
1/21/13 | ||
Boss...there is no update found over there
but then to its showing that message what to do now on Hide “this copy of windows is not genuine” notification in windows 71 replies.
Remove content | Delete | Spam
|
on
1/20/13 | ||
Akash tusi gr8 ho... it works fine but it
reappeared after few days ... shud I continue removing the update or is there some other method to ensure it does not repeat..... on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
1/19/13 | |
tq so much brada,,,,,, u was helped me :)
"NV" on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/19/13 | |
It works perfectly and I'm grateful. on Hide “this copy of windows is not genuine” notification in
windows 7 |
Anonymous
|
on
1/18/13 | |
Hi Akash..it worked successfully...thanks
for your valuable instructions... You are great man... on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/15/13 | ||
How do you 'hide' the update, and does this
prevent windows from re-downloading and installing it? I have changed my settings so I now control what updates it asks me to install, and can I stop it from asking me to download that particular update kb971033 without deactivating windows updates and therfore all other updates that actually help my pc? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
1/14/13 | |
omg You're a life saver. THANKS! :D on Hide “this copy of windows is not genuine” notification in
windows 7 |
on
1/14/13 | ||
Anonymous
|
on
1/13/13 | ||
Anonymous
|
on
1/12/13 | ||
First time I tried it worked well, but now,
it appears again and I use the same way to disappear it, I've removed "KB971033" but when I reboot my lap, the message keep appears.=( How do I remove the message then?? Help please, thanks. on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
1/12/13 | ||
Total legend - BRILLIANT !!! Thanks a lot on Hide “this copy of windows is not genuine” notification in
windows 7 |
Anonymous
|
on
1/12/13 | |
Anonymous
|
on
1/10/13 | ||
thnx a lot frnd..mission completed
successfully.really it s a big deal.thnx a lot and i should reply appreciate you for ur kind replies to all seekers .gr8 on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/10/13 | |
Hi thеrе, just became alert to
your blog through Google, and found that it is really informative. I am going to ωatch out for bгussels. Ó€ will be grateful if уou continue this in futuгe. NumerouÑ• people will be benеfited from your writing. Chеeгs! Also visit my wеblog - payday loans online no credit check Here is my blog post - Online Payday oan on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/9/13 | |
hi Akash, Thanks so much. It worked! It was
a pleasure not to see the window message again. Your instructions were clear and easy to follow. Thanks for your help. :-) S on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/9/13 | |
thanx for your help my pc also encountered
the same problem!.. but now i have solved through your steps, the realy work!.... on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/8/13 | ||
I had no time to try again. I am still with
black desktop. Thanks for asking. I will let you know. My name is Jacqueline. on Hide “this copy of windows is not genuine” notification in windows 7
in response to I have really got stumpted
with Part B. I have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline, by Anonymous. |
Anonymous
|
on
1/8/13 | |
Wont reply to you anymore till 10th feb. I
have been grounded. :'( on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello Akash, Few days ago, I
used your advice in order to get out of this annoying message: "This copy of Windows is not genuine" and it worked. But this morning, when i opened my PC it appeared again.I made the same procedure as before and it worked, but i'm asking: How many times can i use this? Won't appear any damage to my PC (system or...)? I'm waiting for your answer and thanks. AA, by Anonymous. |
on
1/7/13 | ||
I've clearly mentioned in my article that
you need to disable windows update. -"Be sure to turn off windows update or else you will face the same problem again. Alternatively, you can hide Windows Update: KB971033 in your windows update history." It wont harm your system. I give you my words. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hello Akash, Few days ago, I
used your advice in order to get out of this annoying message: "This copy of Windows is not genuine" and it worked. But this morning, when i opened my PC it appeared again.I made the same procedure as before and it worked, but i'm asking: How many times can i use this? Won't appear any damage to my PC (system or...)? I'm waiting for your answer and thanks. AA, by Anonymous. |
on
1/7/13 | ||
Hello Akash, Few days ago, I used your
advice in order to get out of this annoying message: "This copy of Windows is not genuine" and it worked. But this morning, when i opened my PC it appeared again.I made the same procedure as before and it worked, but i'm asking: How many times can i use this? Won't appear any damage to my PC (system or...)? I'm waiting for your answer and thanks. AA on Hide “this copy of windows is not genuine” notification in windows 72 replies. |
Anonymous
|
on
1/7/13 | |
Thanks Akash, It was activated before for
about 1 year, but I recently installed a new SSD and scanner, and I think that's when this episode began with the non-genuine message. I'll try to reactivate it somehow. Thanks again. Cheers, L. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi, Thanks v much for your expert
advice, it all worked fine. However, I know checked the activation status of windows and I get: "3 days until automatic activation" Does it mean that my windows copy is not active anymore?? Cheers, L., by Anonymous. |
Anonymous
|
on
1/6/13 | |
Unfortunately, I've no idea about that
freaky "3 days until automatic activation" status. I never faced it before. Well, it sounds pretty much like your windows is not activated. Next time when you gonna install windows, make sure that it is a cracked version setup or buy that expensive genuine version from the market(well nobody likes that). Nvm. I'll try to find out how to fix that. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi, Thanks v much for your
expert advice, it all worked fine. However, I know checked the activation status of windows and I get: "3 days until automatic activation" Does it mean that my windows copy is not active anymore?? Cheers, L., by Anonymous. |
on
1/6/13 | ||
Hi, Thanks v much for your expert advice, it
all worked fine. However, I know checked the activation status of windows and I get: "3 days until automatic activation" Does it mean that my windows copy is not active anymore?? Cheers, L. on Hide “this copy of windows is not genuine” notification in windows 72 replies. |
Anonymous
|
on
1/5/13 | |
I guess it worked out and you are done,
don't you? on Hide “this copy of windows is not genuine” notification in windows 7
in response to I have really got stumpted
with Part B. I have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline, by Anonymous. |
on
1/5/13 | ||
That's gr8. I hope you and the guy from the
last day commenting anonymously are the same. on Hide “this copy of windows is not genuine” notification in windows 7
in response to oh nvm, my wallpaper doesnt
change anymore to black screen and i dont get any notifications, which were really annoying. thanks :), by Anonymous. |
on
1/5/13 | ||
oh nvm, my wallpaper doesnt change anymore
to black screen and i dont get any notifications, which were really annoying. thanks :) on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
1/5/13 | |
in response to I have really got stumpted
with Part B. I have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline, by Anonymous. |
Anonymous
|
on
1/4/13 | |
I have tried again, many times. I have even
retyped the whole c:\windows\stytem32\ again. still does not work. I have put space between vbs and -rearm. What could I be doing wrong? on Hide “this copy of windows is not genuine” notification in windows 7
in response to I have really got stumpted
with Part B. I have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline, by Anonymous. |
Anonymous
|
on
1/4/13 | |
after part B step 1, In the command prompt
window type: >cd "c:\windows\system32\" >slmgr.vbs -rearm It'll work on Hide “this copy of windows is not genuine” notification in windows 7
in response to I have really got stumpted
with Part B. I have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline, by Anonymous. |
Anonymous
|
on
1/4/13 | |
Hmm i folowed the steps and rearmed my
windows, rebooted but the msg is still there.. any thoughts? on Hide “this copy of windows is not genuine” notification in windows 7 |
Anonymous
|
on
1/4/13 | |
I have found the slmgr.vbs file in Sistem32
folder. It is there but still cannot rearm in Command prompt as administrator. I hate losing my desktop picture. on Hide “this copy of windows is not genuine” notification in windows 7
in response to I have really got stumpted
with Part B. I have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline, by Anonymous. |
Anonymous
|
on
1/4/13 | |
Search every single drive of your computer
for the file "slmgr.vbs". And let me know where it is. on Hide “this copy of windows is not genuine” notification in windows 7
in response to I have really got stumpted
with Part B. I have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline, by Anonymous. |
on
1/4/13 | ||
THESE COMMENTS THREADS MIGHT SOLVE YOUR
PROBLEM *************************************************** Theodore WongDecember 23, 2012 HI, I could not find the KB971033 in my window updates....any suggestion? Reply Replies Akash Kumar SahuDecember 23, 2012 This sounds weird!! Are you sure you searched for that update properly?? Well, if not then try this: go to "installed updates" then write KB971033 at the search bar. If it doesn't exist........ummmmmm we'll see later. Ping me. View this image. It may help. JOSHDecember 24, 2012 Go to Windows update > view installed programes > type KB971033 in the search option and it will pop up... click on it > uninstall pops up > click on uninstall> once done restart After that follow Part B as well... Akash Kumar SahuDecember 24, 2012 I guess that's the other way and an easy way to do PART A. I appreciate it. *********************************************************** OR *********************************************************** on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/4/13 | ||
I have really got stumpted with Part B. I
have followed all the comments as I keep getting the comment that slmgr.vbs is not recognised. Could you give easier sugestions please. Jacqueline on Hide “this copy of windows is not genuine” notification in windows 77 replies. |
Anonymous
|
on
1/4/13 | |
THESE COMMENT THREADS MIGHT SOLVE YOUR
PROBLEM *************************************************** Theodore WongDecember 23, 2012 HI, I could not find the KB971033 in my window updates....any suggestion? Reply Replies Akash Kumar SahuDecember 23, 2012 This sounds weird!! Are you sure you searched for that update properly?? Well, if not then try this: go to "installed updates" then write KB971033 at the search bar. If it doesn't exist........ummmmmm we'll see later. Ping me. View this image. It may help. JOSHDecember 24, 2012 Go to Windows update > view installed programes > type KB971033 in the search option and it will pop up... click on it > uninstall pops up > click on uninstall> once done restart After that follow Part B as well... Akash Kumar SahuDecember 24, 2012 I guess that's the other way and an easy way to do PART A. I appreciate it. *********************************************************** OR *********************************************************** on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/4/13 | ||
PROBLEM ALREADY SOLVED. REFER COMMENTS.
aMoonJanuary 01, 2013 Thank you so much Akash. I had a minor issue with Part B, but it worked out in the end. When trying to do Part B, I got this message, when I typed [C:\Windows\System32\slmgr.vbs -rearm]. 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. The "slmgr.vbs" file was not in the "C:\Windows\System32" folder... instead it was in a very weird place - "C:\Windows\winsxs\amd64....(a lot of alpha-numeric characters)". I did find a file named "slmgr.vbs.REMOVEWAT" in the System32 folder though. After "-rearm"-ing the "slmgr.vbs" file in the weird folder, I rebooted and my pc loaded without that annoying message. Thank you so much for the help. Really really appreciate it. Reply ALSO AnonymousDecember 28, 2012 Thanks! This worked great. The only thing I noticed is that, after getting the message that slmgr wasn't a recognized program, I followed one of the comments to the system32 on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hey akash, i'v done
the part A but when i get the part B it tells me that the commando i've tried to enter couldn't get recognized, i'm running windows 7 ultimate., by Behruz Jahangiri. |
on
1/4/13 | ||
Helping people makes me feel good. you are
most welcome friend. And thanks for explaining the trouble you were facing and the solution to it. It will benefit other people also. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Thank you so much Akash. I
had a minor issue with Part B, but it worked out in the end. When trying to do Part B, I got this message, when I typed [C:\Windows\System32\slmgr.vbs -rearm]. 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. The "slmgr.vbs" file was not in the "C:\Windows\System32" folder... instead it was in a very weird place - "C:\Windows\winsxs\amd64....(a lot of alpha-numeric characters)". I did find a file named "slmgr.vbs.REMOVEWAT" in the System32 folder though. After "-rearm"-ing the "slmgr.vbs" file in the weird folder, I rebooted and my pc loaded without that annoying message. Thank you so much for the help. Really really appreciate it., by aMoon. |
on
1/4/13 | ||
This problem has already been discussed.
Please refer comments. Comment by - "Anonymous December 21, 2012 ********************************* Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. *how should i do?" *********************************** OR Follow these steps: Comment by - Akash Kumar SahuDecember 21, 2012 ************************ Looks like your system path setting is altered. Make sure you have the file "slmgr.vbs" in your system's windows>system32 folder. i.e., "c:\windows\system32\slmgr.vbs" If it is there, do the following: after part B step 1, In the command prompt window type: >cd "c:\windows\system32\" >slmgr.vbs -rearm It'll work Akash Kumar SahuDecember 23, 2012 check this snapshot...... https://lh4.googleusercontent.com/-hOIc032dYbs/UNcQ5t7y5XI/AAAAAAAAANE/AJ0rkYEVdtk/s640/copy%2520of% on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hey Akash :) I've
done the steps, but when i come to the part where i have to type slmgr.vbs -rearm it tells me that the commando didn't get recognized. Do you know what to do?, by Behruz Jahangiri. |
on
1/4/13 | ||
Hey akash, i'v done the part A but when i
get the part B it tells me that the commando i've tried to enter couldn't get recognized, i'm running windows 7 ultimate. on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
1/4/13 | ||
Hey Akash :) I've done the steps, but when i
come to the part where i have to type slmgr.vbs -rearm it tells me that the commando didn't get recognized. Do you know what to do? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
1/4/13 | ||
please refer to comments. perhaps it may
solve your problem. Try it and tell me. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/4/13 | ||
on
1/4/13 | |||
on
1/4/13 | |||
You are welcome and thanks for the comment
on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/4/13 | ||
Dont mind but what does "mabuhay ka
akash!" means? Could you tell where are you from? and you are welcome on Hide “this copy of windows is not genuine” notification in windows 7
in response to one great solution to a very
annoying message from windows.... your instructions were simple and easy to follow, thanks for the screen shots,it helped a lot... more power! mabuhay ka akash! salamat(thank you)! , by Anonymous. |
on
1/4/13 | ||
Sorry, I found the 1st part of your comment
kinda hard to comprehend. But, for the second part......welcome on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/4/13 | ||
I like making people happy. You are most
welcome. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
1/4/13 | ||
Akash bhai, it worked well, thanks soo much
yaar. on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
1/4/13 | |
sos un puto crack! Many thanks! on Hide “this copy of windows is not genuine” notification in
windows 71 replies. |
Anonymous
|
on
1/3/13 | |
one great solution to a very annoying
message from windows.... your instructions were simple and easy to follow, thanks for the screen shots,it helped a lot... more power! mabuhay ka akash! salamat(thank you)! on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
1/3/13 | |
Thank You !!! Worked like a charm. on Hide “this copy of windows is not genuine” notification in
windows 71 replies. |
Anonymous
|
on
1/2/13 | |
You are a lifesaver!! on Hide “this copy of windows is not genuine” notification in
windows 71 replies. |
on
1/1/13 | ||
You are a lifesaver! on Hide “this copy of windows is not genuine” notification in
windows 71 replies. |
on
1/1/13 | ||
der's no such update KB971033 in my
installed updates... :( on Hide “this copy of windows is not genuine” notification in windows 73 replies. |
on
1/1/13 | ||
Thank you so much Akash. I had a minor issue
with Part B, but it worked out in the end. When trying to do Part B, I got this message, when I typed [C:\Windows\System32\slmgr.vbs -rearm]. 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. The "slmgr.vbs" file was not in the "C:\Windows\System32" folder... instead it was in a very weird place - "C:\Windows\winsxs\amd64....(a lot of alpha-numeric characters)". I did find a file named "slmgr.vbs.REMOVEWAT" in the System32 folder though. After "-rearm"-ing the "slmgr.vbs" file in the weird folder, I rebooted and my pc loaded without that annoying message. Thank you so much for the help. Really really appreciate it. on Hide “this copy of windows is not genuine” notification in windows 73 replies. |
on
1/1/13 | ||
OK. Looks like you dont need to do PART A.
Just do the PART B of the procedure. If it didn't work out we'll think something else. Hey! or you could install the "KB971033" update from Microsoft windows 7 website and then do the above procedure. But, before that execute PART B on your system and ping me. I hope it'll work out. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi Akash I am not able to
find this update 'KB971033', to uninstall it. Would you please help me?, by Anonymous. |
on
12/30/12 | ||
Gr8. You know what?? Your this comment will
definitely help out other people facing the same problem. :) on Hide “this copy of windows is not genuine” notification in windows 7
in response to Thanks! This worked great.
The only thing I noticed is that, after getting the message that slmgr wasn't a recognized program, I followed one of the comments to the system32 folder, where I found that the program I used to 'validate' Windows 7 (and which didn't really work), removewat, had changed the name of the program to slmgr.vbs.removewat. Changed it back, re-armed, then re-renamed it., by Anonymous. |
on
12/30/12 | ||
No big! Thanks 4 d compliments. on Hide “this copy of windows is not genuine” notification in
windows 7 |
on
12/30/12 | ||
Getting +ve reply feels good. You are
welcome. on Hide “this copy of windows is not genuine” notification in windows 7 |
on
12/30/12 | ||
Thank you so much for this, really :):) on Hide “this copy of windows is not genuine” notification in
windows 71 replies. |
on
12/29/12 | ||
I DO AS YOUR INSTRUCTION BUT WHEN I WRITE
KB971033 IN SEARCH MESSAGE WILL APPEAR THAT NO MUCH ITEMS FOR YOUR SEARCH PLS CNFM on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi Akash I am not able to
find this update 'KB971033', to uninstall it. Would you please help me?, by Anonymous. |
MUBADIR
|
on
12/29/12 | |
Thanks! This worked great. The only thing I
noticed is that, after getting the message that slmgr wasn't a recognized program, I followed one of the comments to the system32 folder, where I found that the program I used to 'validate' Windows 7 (and which didn't really work), removewat, had changed the name of the program to slmgr.vbs.removewat. Changed it back, re-armed, then re-renamed it. on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
12/28/12 | |
thanks a lot man!! you're the BOMB! on Hide “this copy of windows is not genuine” notification in
windows 71 replies. |
Anonymous
|
on
12/28/12 | |
Go to Control panel> Programs > view
installed updates(under program and features) > type KB971033 in the search option and it will pop up, right click & uninstall it. I've added an image regarding this. See point PART A step 4. on Hide “this copy of windows is not genuine” notification in windows 7
in response to I have found this update ,
but i cant remove it, i cant right-click, i also didnt see "uninstall" button plz help , byAnonymous. |
on
12/27/12 | ||
I have found this update , but i cant remove
it, i cant right-click, i also didnt see "uninstall" button plz help on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
12/26/12 | |
on
12/26/12 | |||
Ummmmmm.....I guess u wont. Even after
turning off the updates, the windows will still install the critical/important updates automatically. So, don't worry about that. on Hide “this copy of windows is not genuine” notification in windows 7
in response to i tried this and it worked
fine but wont i run into problems if i turn of windows update?, by Mimi Simon. |
on
12/26/12 | ||
Go to Control panel> Programs > view
installed updates(under program and features) > type KB971033 in the search option and it will pop up... If it does not pop-up, then dont worry just implement the PART B i.e., rearm windows. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Hi Akash I am not able to
find this update 'KB971033', to uninstall it. Would you please help me?, by Anonymous. |
on
12/26/12 | ||
Anonymous
|
on
12/25/12 | ||
i tried this and it worked fine but wont i
run into problems if i turn of windows update? on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
12/25/12 | ||
Hi Akash I am not able to find this update
'KB971033', to uninstall it. Would you please help me? on Hide “this copy of windows is not genuine” notification in windows 73 replies. |
Anonymous
|
on
12/25/12 | |
I guess that's the other way and an easy way
to do PART A. I appreciate it. on Hide “this copy of windows is not genuine” notification in windows 7
in response to HI, I could not find the
KB971033 in my window updates....any suggestion?, by Theodore Wong. |
on
12/24/12 | ||
in response to Hey Akash...this update
really helped me to get rid of the irritating pop up saying ''this copy of windows is not genuine''...a great source of info for people who cannot afford Windows OEM like me... Thanks a mil...great stuff...!!!, by JOSH. |
on
12/24/12 | ||
on
12/24/12 | |||
Go to Windows update > view installed
programes > type KB971033 in the search option and it will pop up... click on it > uninstall pops up > click on uninstall> once done restart After that follow Part B as well... on Hide “this copy of windows is not genuine” notification in windows 7
in response to HI, I could not find the
KB971033 in my window updates....any suggestion?, by Theodore Wong. |
on
12/24/12 | ||
Hey Akash...this update really helped me to
get rid of the irritating pop up saying ''this copy of windows is not genuine''...a great source of info for people who cannot afford Windows OEM like me... Thanks a mil...great stuff...!!! on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
12/24/12 | ||
Hey Akash...this really helped me to get rid
of the irritating pop up every time I log on saying ''this copy of windows is not genuine''...and also avoids my desktop disappearing every hour...great info for people who can't afford original windows OEM like me... Thanks a mil...!!! on Hide “this copy of windows is not genuine” notification in windows 7 |
on
12/24/12 | ||
Its awesome, it worked for me thanks a lot
--Vasu on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
12/24/12 | |
This sounds weird!! Are you sure you
searched for that update properly?? Well, if not then try this: go to "installed updates" then write KB971033 at the search bar. If it doesn't exist........ummmmmm we'll see later. Ping me. View this image. It may help. on Hide “this copy of windows is not genuine” notification in windows 7
in response to HI, I could not find the
KB971033 in my window updates....any suggestion?, by Theodore Wong. |
on
12/23/12 | ||
Sorry, check this......
https://lh4.googleusercontent.com/-hOIc032dYbs/UNcQ5t7y5XI/AAAAAAAAANE/AJ0rkYEVdtk/s640/copy%2520of%2520windows%2520is%2520not%2520genuine.PNG on Hide “this copy of windows is not genuine” notification in windows 7
in response to Microsoft Windows [Version
6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. *how should i do? , byAnonymous. |
on
12/23/12 | ||
HI, I could not find the KB971033 in my
window updates....any suggestion? on Hide “this copy of windows is not genuine” notification in windows 73 replies. |
on
12/23/12 | ||
I could not find the KB971033 in my window
updates....may I know how could i resolve? on Hide “this copy of windows is not genuine” notification in windows 7 |
on
12/23/12 | ||
Looks like your system path setting is
altered. Make sure you have the file "slmgr.vbs" in your system's windows>system32 folder. i.e., "c:\windows\system32\slmgr.vbs" If it is there, do the following: after part B step 1, In the command prompt window type: >cd "c:\windows\system32\" >slmgr.vbs -rearm It'll work on Hide “this copy of windows is not genuine” notification in windows 7
in response to Microsoft Windows [Version
6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. *how should i do? , byAnonymous. |
on
12/21/12 | ||
on
12/21/12 | |||
Microsoft Windows [Version 6.1.7601] Copyright
(c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Erwan>slmgr.vbs -rearm 'slmgr.vbs' is not recognized as an internal or external command, operable program or batch file. *how should i do? on Hide “this copy of windows is not genuine” notification in windows 75 replies. |
Anonymous
|
on
12/21/12 | |
thanks Akash.. You are great. This method
works perfectly. on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
on
12/21/12 | ||
This method is specifically meant for
windows 7. It'll not work in vista or xp. I hope you were trying it on windows seven only. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Dint workl bro... Slmgr.vbs
rearm produced some big msgs..dint know that much computer..so couldnt interpret that msg..but the point is it stil says windows not genuine... Kya kare???, by rdx. |
on
11/26/12 | ||
I've changed the steps of part B. Try again.
on Hide “this copy of windows is not genuine” notification in windows 7
in response to WHEN I DO THE PART B 3 STEP
GETTING A MSG OF ERROR 0XCOO4FO25 access denied the requested action requires elevated privilage what can i do pls help me, by bk. |
on 11/26/12
| ||
You were not doing the 1st step of part B
correctly. I've changed the steps of part B. Now it is much easier to do. Try it. It'll definitely work. onHide “this copy of windows is not genuine” notification in windows 7
in response to this did not work with me. i
am not able to do 2nd step, that is 'rearm' "The requested action requires elevated privileges" , by Anonymous. |
on
11/26/12 | ||
Send me screen shot of the error. I'm pretty
sure I can fix it. on Hide “this copy of windows is not genuine” notification in windows 7
in response to Dint workl bro... Slmgr.vbs
rearm produced some big msgs..dint know that much computer..so couldnt interpret that msg..but the point is it stil says windows not genuine... Kya kare???, by rdx. |
on
11/26/12 | ||
make sure you have done the part B's 1st
step right. It is necessary to run the command prompt in administrative mode. on Hide “this copy of windows is not genuine” notification in windows 7
in response to WHEN I DO THE PART B 3 STEP
GETTING A MSG OF ERROR 0XCOO4FO25 access denied the requested action requires elevated privilage what can i do pls help me, by bk. |
on
11/26/12 | ||
this did not work with me. i am not able to
do 2nd step, that is 'rearm' "The requested action requires elevated privileges" on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
Anonymous
|
on
11/23/12 | |
Dint workl bro... Slmgr.vbs rearm produced
some big msgs..dint know that much computer..so couldnt interpret that msg..but the point is it stil says windows not genuine... Kya kare??? on Hide “this copy of windows is not genuine” notification in windows 73 replies. |
on
11/2/12 | ||
WHEN I DO THE PART B 3 STEP GETTING A MSG OF
ERROR 0XCOO4FO25 access denied the requested action requires elevated privilage what can i do pls help me on Hide “this copy of windows is not genuine” notification in windows 73 replies. |
bk
|
on
10/22/12 | |
Don't forget to subscribe for latest
updates..!!! on Hide “this copy of windows is not genuine” notification in windows 7 |
on
9/14/12 | ||
on
9/13/12 | |||
on
9/13/12 | |||
Thank you. Now, I can set wallpaper on my
desktop screen. on Hide “this copy of windows is not genuine” notification in windows 71 replies. |
john3825
|
on
9/13/12 | |
It works. Really helpful. on Hide “this copy of windows is not genuine” notification in
windows 73 replies.
Remove content | Delete | Spam
|
Anonymous
|
on
9/13/12 |
Please do not comment here. Post your comments in "Comment Here" page.
ReplyDeleteI am getting the windows 7 popup, telling me, over and over and over again, that my "copy of Windows is not genuine". I bought my Windows with the PC and it is certainly genuine, not that this is stopping MS from spamming me with this crap of course. presumably they imagine that my "license" to use their crappy OS has "expired": They\re not getting a cent from me, I can tell you that.
ReplyDeleteAnyway, I tried to do what you suggested and when I found the 971033 update and tried to uninstall it, nothing happens. It doesn`t disappear from the list and I get no response of any kind. Any ideas?
Wow, happy to see this awesome post. I hope this think help any newbie for their awesome work. By the way thanks for share this awesomeness from Ramen deuren
ReplyDeleteshiny pokemon How to content and Tech Facts, App Tips, Mobile Tricks, Windows Optimization, Games guide.
ReplyDelete